Questions to Ask a Software Development Company Before Hiring

Questions to Ask a Software Development Company Before Hiring

Questions to Ask a Software Development Company Before Hiring

Questions to Ask a Software Development Company Before Hiring

What happens when you hand a project to a development team and discover, six months and a large invoice later, that nobody owns the code, the estimates were fiction, and the security review never happened? That scenario is common enough to be a cliché, and it almost always traces back to questions nobody asked at the start. The good news: a focused set of questions, asked early, separates serious partners from smooth talkers.

Quick Answer: What questions should I ask a software development company before hiring?

Ask about process, ownership, security, and exit terms before anything else. Specifically, a buyer should ask how the team estimates and handles slippage, who owns the code and intellectual property, how security and data protection are handled, how testing and handover work, and what happens if the relationship ends. These questions apply whether you are hiring a small studio, a large agency, or a freelance team, though the answers will differ in depth and formality.

Agencies often answer differently from freelancers: agencies bring process and bench depth but more overhead, while freelancers bring direct access but thinner coverage. Before signing, compare estimation method, IP assignment, security practices, data location, testing approach, handover terms, references, and total cost structure.

Why the questions matter more than the pitch

Why the questions matter more than the pitch

Most buyers evaluate vendors on portfolio and price. Both matter, but neither predicts whether the project will land. A portfolio shows what a team shipped for someone else; it says little about how they behave when requirements shift, a deadline slips, or a key developer leaves.

The most commonly cited research on project failure points at unclear or changing requirements and weak user involvement as major culprits. Those figures are quoted everywhere, and they are also disputed on methodological grounds, so treat them as a directional signal rather than gospel. The practical lesson holds regardless: the questions that surface how a vendor handles requirements, change, and communication are the ones that protect your budget.

A useful mental model is that you are not buying code. You are buying a working relationship with a paper trail. The questions below test whether that paper trail exists.

Questions about scope, requirements, and estimation

Start where projects usually break. Ask the team to walk you through how they turn a rough idea into a plan.

How do you handle requirements that change mid-project?

Every project changes. The real question is what happens when it does. A strong answer describes a change process: written change requests, impact assessment on timeline and cost, and a decision point where you approve or defer. A weak answer is “we’re agile, so we just adapt,” which often means nobody is tracking scope creep until the invoice arrives.

How do you estimate, and what happens when estimates slip?

Ask whether they estimate in ranges or single numbers, what their historical accuracy looks like, and who absorbs overruns. This connects directly to contract type. Fixed-price contracts shift risk to the vendor, which often encourages padding or quiet scope cuts. Time-and-materials contracts shift risk to you, which rewards transparency but demands close monitoring. Neither is wrong; you just need to know which one you are signing and why.

Who is actually doing the work?

Agencies pitch senior architects and staff the project with juniors. Ask directly: who will write the code, how many projects is each person on, and what happens if they leave. Ask to meet the actual team, not only the sales engineer.

Questions about code ownership, licensing, and access

This is where buyers get burned most often, and where a few blunt questions pay for themselves.

Who owns the code and the intellectual property?

Copyright defaults vary by jurisdiction and contract, so do not assume anything. Ask for explicit written assignment of intellectual property on delivery and payment, and confirm you get the repositories, not only a deployed application. If they host your code on their own accounts, ask how access transfers.

What third-party and open-source components will you use?

Every modern build leans on open-source libraries. Ask the vendor to list the licenses of dependencies and to flag anything under copyleft terms such as GPL, which can impose obligations if you distribute the software. A team that cannot produce a license inventory on request is telling you something about how they work.

Do I get documentation and environment access?

Ask what documentation ships with the project: architecture notes, setup instructions, deployment scripts, and credentials. Vendors who treat documentation as an optional extra tend to be the same ones who make handover painful. For a broader lens on vetting technology suppliers and the questions that expose weak operational practices, the managed detection response checklist of 12 questions to ask before signing is a useful parallel read.

Questions about security and data protection

Security questions apply beyond banks and hospitals. Any product that touches user data carries risk, and the buyer usually carries the legal weight.

How do you handle application security?

Ask whether the team follows the OWASP Top 10, the widely used reference list of critical web application security risks. Then go one level deeper: do they do threat modeling, dependency scanning, and security testing as part of the build, or only as a pre-launch afterthought? Ask who reviews the code and whether security findings block a release.

Where does our data live, and who can access it?

If you handle personal data of EU or UK residents, you are likely the controller and the vendor a processor, which triggers written contract requirements covering processing terms, sub-processors, and security measures. Ask which sub-processors they use, where data is stored, and how access is logged. This is a legal question as much as a technical one, and it belongs in the contract, not in a verbal promise.

What is your incident response plan?

Ask what happens if there is a breach or an outage: who is notified, how fast, and through what channel. A vendor without a written answer has not thought about it.

Security diligence extends beyond the code itself. If your product involves conversational interfaces, the questions in this guide to AI chatbot security in 2027 cover nine checks worth asking before buying, and they pair well with the development questions above.

Questions about process, testing, and quality

Process questions reveal whether quality is engineered or hoped for.

What does “done” mean to you?

Ask for their definition of done. A credible answer mentions automated tests, code review, and a working build in a shared environment. Vague answers about “meeting requirements” suggest quality depends on who is watching.

How do you test?

Look for automated testing, continuous integration, and a clear separation between developer testing and independent QA. Research on software delivery performance has consistently linked these practices to better outcomes, and they are core to the continuous delivery literature. Ask what percentage of the codebase is covered by automated tests, and do not accept “we test manually” as a complete answer for anything long-lived.

How do you communicate and report progress?

Ask for the cadence: weekly demos, written status updates, a shared board you can see. Then ask what happens when a milestone slips. The answer tells you whether you will hear bad news early or discover it at the end.

Questions about references, contracts, and exit

The final cluster protects you after the honeymoon phase ends.

Can I speak to references, including one former client?

Ask for named references with permission to contact them, and ask each reference two questions: what went wrong, and how did the vendor handle it. Every project has friction; the interesting part is the response. If a vendor cannot produce a single client willing to talk, that is an answer in itself.

What are the handover and exit terms?

Ask what happens if you want to move the work in-house or to another vendor. You should receive documentation, knowledge transfer sessions, and full access to code, infrastructure, and accounts. Exit clauses are cheap to negotiate at signing and expensive to negotiate during a dispute.

What is the total cost, including the parts nobody quotes?

Ask about change request rates, hosting and license costs, support retainers, and what happens to pricing after year one. The cheapest quote is often the most expensive project.

Question area What a strong answer includes Red flag
Estimation Ranges, historical accuracy, written change process Single fixed number, no change process
Ownership Written IP assignment, repo access, license list “We’ll sort that out later”
Security OWASP Top 10, threat modeling, dependency scanning Security treated as pre-launch only
Data protection Sub-processor list, data location, contract terms Verbal assurances, no documentation
Testing Automated tests, code review, CI Manual testing only
Exit Documentation, knowledge transfer, account transfer Hosting locked to vendor accounts

Practical tips that save real money

First-hand experience from buyers and delivery leads points to a few habits that consistently work. Ask for a small paid discovery phase before committing to the full build; it tests how the team thinks at low cost. Insist that all communication and decisions live in shared tools you can access, not in private channels. Read the contract for the words “assignment,” “sub-processor,” and “termination assistance,” and get plain-language explanations of each.

Common mistakes are equally predictable. Buyers skip reference calls because the pitch was good. They accept a fixed price without asking what gets cut when the estimate proves wrong. They let the vendor own the cloud accounts. They discover the licensing question only when legal review flags a copyleft dependency three weeks before launch.

If your vendor selection involves consumer-facing hardware or accessories alongside software, the same diligence logic applies to product claims; this Rillabox review for buyers covers what to check before ordering, and the pattern of verifying claims before committing carries over directly.

Conclusion

Hiring a software development company is a diligence exercise, not a leap of faith. The questions above are not adversarial; they are the questions good vendors expect and answer fluently. Ask about estimation and change, ownership and licensing, security and data protection, testing and communication, references and exit. Then compare the answers against the contract, because that is where promises become enforceable. A team that welcomes these questions is usually the team you want. A team that dodges them has just saved you months of trouble.

Frequently asked questions

How many questions is too many to ask a vendor?

There is no upper limit worth worrying about. Serious vendors expect thorough diligence and often have prepared answers. If a team seems irritated by detailed questions before signing, imagine how they will respond to a change request after signing.

Should I choose fixed-price or time-and-materials?

It depends on how well-defined the scope is. Fixed-price suits small, clearly specified work and shifts risk to the vendor, often at a premium. Time-and-materials suits evolving products and rewards transparency, but requires you to monitor progress closely. Many buyers use a hybrid: fixed-price discovery, then time-and-materials delivery.

What if the vendor refuses to assign intellectual property?

Treat it as a serious warning. Some vendors license their own pre-built components, which can be reasonable, but you should still own your custom code and have clear, perpetual rights to anything reused. Get the distinction in writing before signing.

How do I verify security claims without a technical background?

Ask for artifacts rather than assurances: a security testing report, a dependency scan summary, and a written incident response plan. You can also ask whether the team follows the OWASP Top 10 and request a walkthrough of how a security finding gets fixed. If needed, bring in an independent reviewer for a short audit.

What should a handover package include?

At minimum: source code in repositories you control, architecture and setup documentation, deployment scripts, credentials and account ownership, a license inventory, and a knowledge transfer session with the people who built the system. Confirm all of it in the contract.

How do I check references properly?

Ask for three references, including one from a client who is no longer working with the vendor. Ask each one what went wrong and how the vendor responded. Specific stories about recovered problems are more informative than generic praise.

on this page