In 2016, a botnet called Mirai quietly assembled an army of hundreds of thousands of hijacked devices — webcams, baby monitors, home routers — and used it to knock major websites offline for hours. The devices were not broken by sophisticated exploits. Most were compromised because they still used factory default passwords that anyone could look up online. Nearly a decade later, that same weakness remains one of the most common ways smart homes get hacked.
The uncomfortable truth is that convenience and security pull in opposite directions. A smart speaker that responds instantly, a camera you can check from anywhere, a lock that opens with your phone — each of these is a small computer with an internet connection, and every connected computer is a potential doorway. The good news: you don’t need to be a network engineer to close most of those doors. You need a few habits, a couple of hours of setup, and the discipline to revisit the system every few months.
This guide walks through what actually works, in the order that gives you the biggest security return for the least effort.
Why smart homes get targeted in the first place
Hackers rarely care about your smart bulb for its own sake. What they want is access: to your home network, your accounts, your bandwidth, and your privacy. A compromised device can be used to spy through a camera, to launch attacks on other systems, or as a stepping stone to the laptop where you do your banking.
Several factors make smart homes attractive targets:
- Weak or default credentials. Many devices ship with a universal default username and password, and plenty of people never change them.
- Rarely updated firmware. Unlike phones, smart devices often go years without patches — or never receive them at all.
- Always-on connectivity. A device that’s online 24/7 gives an attacker unlimited attempts.
- Cloud dependence. Many devices route everything through a manufacturer’s servers, so a breach there can expose thousands of homes at once.
Regulators have started to respond. The UK’s Product Security and Telecommunications Infrastructure regime, which took effect in April 2024, bans universal default passwords on consumer connectable products and requires manufacturers to publish vulnerability-disclosure contact details. In the United States, the FCC’s U.S. Cyber Trust Mark labeling program aims to help shoppers identify devices that meet baseline security standards. These are welcome steps, but they put the floor in place — not the ceiling. The rest is up to you.
Start with the router, because everything flows through it

If your smart home is a building, the router is the foundation. Securing individual gadgets while leaving the router wide open is like locking the bedroom doors but leaving the front door ajar.
Here’s the practical sequence:
- Log into your router’s admin panel and change the administrator password to something long and unique. This is separate from your Wi-Fi password.
- Update the router’s firmware and, if the option exists, turn on automatic updates.
- Disable WPS (Wi-Fi Protected Setup). The push-button pairing feature is convenient, but its PIN-based mode has well-documented weaknesses.
- Turn off UPnP unless a specific device genuinely needs it. Universal Plug and Play lets devices open ports on your router automatically — which is exactly the kind of convenience attackers appreciate.
- Use WPA2 or WPA3 encryption with a strong passphrase. If your router only supports WEP or plain WPA, it’s time to replace it.
If you want a deeper walkthrough of router and Wi-Fi hardening, this guide on how to secure your home wi-fi network covers the settings worth checking in more detail.
Put your smart devices on their own network
This is the single most effective structural change most people can make, and it takes about ten minutes.
Most modern routers support a guest network or a dedicated IoT network. Move every smart plug, camera, bulb, and speaker onto that separate network, and keep your phones, laptops, and tablets on the main one. The logic is simple: if a cheap smart plug gets compromised, the attacker lands on a network segment that contains only other gadgets — not your laptop with saved passwords and tax documents.
A few practical notes from people who’ve done this:
- Guest networks sometimes isolate devices from each other, which can break features that need devices to talk locally. Test your setup before you rely on it.
- Some hubs and bridges need to be on the same network as the devices they control. Check before you move things around.
- Label the network clearly — something like “Home-IoT” — so guests and family members don’t join it by accident.
If you’re using a dedicated hub to coordinate devices, it’s worth understanding what that hub can and can’t protect. A device like the Home Center Lite smart home hub centralizes control, but it still depends on the network around it being properly configured. (Home automation)
Change every default password and use a password manager
This sounds obvious, and yet it remains the most common failure point. Every device you connect should get a unique, long password — ideally generated and stored in a password manager rather than memorized or reused.
A workable system:
- Use a password manager for every device account and app login.
- Turn on two-factor authentication wherever the manufacturer offers it, especially for cameras, locks, and anything with a cloud account.
- Never reuse a password across devices or services. One breach shouldn’t cascade.
- Write down recovery codes and store them somewhere offline.
The temptation to reuse a familiar password across five gadgets is real. Resist it. Credential-stuffing attacks — where stolen username/password pairs from one breach are tried against other services — are automated and relentless.
Keep firmware updated, and know when a device is abandoned
Firmware updates are the highest-value maintenance habit in a smart home. They patch the vulnerabilities researchers find, and they’re usually a two-minute job inside the manufacturer’s app.
Set a recurring reminder — quarterly is reasonable — to check every device for updates. Some apps support automatic updates; enable them. For devices that don’t, check manually.
Equally important: know when to retire a device. If a manufacturer has stopped issuing security patches, that gadget is a permanent liability. A five-year-old camera that still works fine is still a camera that will never be fixed again. Replace it, or at minimum isolate it on its own network segment and disable remote access.
When you choose new devices, look for ones with a clear update policy. The best smart home devices for beginners tend to come from manufacturers that have a track record of shipping patches, rather than the cheapest option on the shelf.
Lock down cameras and doorbells first
Cameras deserve their own section because a hacked camera is a privacy violation you can’t undo. Stories of strangers speaking through baby monitors are not urban legends; they’re the predictable result of weak passwords and exposed remote access.
Priority actions:
- Change the default password immediately on every camera and doorbell.
- Enable two-factor authentication on the associated app account.
- Disable remote access if you don’t genuinely need to view the feed from outside your home.
- Keep the camera’s firmware current and check for updates monthly if the app doesn’t do it automatically.
- Point cameras away from sensitive areas — bedrooms, interior windows, anything you wouldn’t want recorded.
- Segment cameras on the IoT network, separate from everything else.
If you’re adding smart locks to the mix, the same principles apply, plus a few lock-specific ones. This overview of the best smart locks for home security is a useful starting point for choosing hardware that supports proper authentication and audit logs.
Audit app permissions and third-party integrations
Every smart device comes with an app, and every app wants permissions. A camera app that requests access to your contacts, microphone, and location is asking for far more than it needs.
Go through your phone’s settings and review what each smart-home app can access. Revoke anything that isn’t essential. Then look at integrations: if you’ve connected your lights to a voice assistant, a scheduling service, and three third-party skills you tried once and forgot about, those connections are all still live.
A quarterly cleanup is worth the effort:
- Remove integrations you no longer use.
- Revoke access for apps you’ve deleted.
- Check which accounts have access to shared devices — a former roommate’s login shouldn’t still control your front door.
Watch for the classic mistakes
Some errors come up again and again, and knowing them in advance saves a lot of grief.
| Mistake | Why it’s risky | The fix |
|---|---|---|
| Leaving default passwords | Publicly known, instantly exploitable | Change every one on setup |
| Reusing one password everywhere | One breach compromises everything | Unique passwords via a manager |
| Putting all devices on one network | A single weak device exposes the rest | Separate IoT/guest network |
| Ignoring firmware updates | Known flaws stay unpatched | Enable auto-updates, check quarterly |
| Exposing devices to the internet for remote access | Opens a direct door to attackers | Use the manufacturer’s cloud app instead of port forwarding |
| Buying devices with no update policy | Permanent unpatched liability | Check support commitments before buying |
The port-forwarding mistake deserves emphasis. Some older guides suggest forwarding ports so you can reach a camera or hub from outside your home. That’s a direct exposure of the device to the internet, and it’s how a lot of cameras end up indexed by search engines. Use the manufacturer’s app, which at least goes through an authenticated cloud service. (Cybersecurity Best Practices)
Build a simple maintenance routine
Security isn’t a one-time setup; it’s a habit. A light quarterly routine keeps the whole system healthy:
- Check every device for firmware updates.
- Review who has account access to shared devices.
- Skim your router’s connected-devices list for anything unfamiliar.
- Confirm two-factor authentication is still enabled on critical accounts.
- Remove unused apps and integrations.
That’s maybe thirty minutes, four times a year. It’s the difference between a smart home that’s genuinely secure and one that merely feels secure.
Conclusion
Securing a smart home from hackers isn’t about buying the most expensive gear or mastering network engineering. It’s about a handful of unglamorous habits: unique passwords, updated firmware, a segmented network, two-factor authentication, and a willingness to retire devices that no longer receive patches. None of these steps is difficult on its own. Together, they close the vast majority of the doors attackers actually use.
The Mirai botnet succeeded because hundreds of thousands of people left the front door open. The fix then is the same as the fix now: close it, and check it again every few months. Start with the router this weekend, move your gadgets to a separate network, and set a calendar reminder for the next update check. Your smart home will keep being convenient — it’ll just stop being an easy target.
FAQ
How often should I update my smart home devices?
Check for firmware updates at least quarterly, and enable automatic updates wherever the manufacturer offers them. Cameras and locks deserve monthly checks if updates aren’t automatic, since they’re the devices most likely to expose you to real-world harm if compromised.
Is a guest network really enough to protect my smart devices?
A separate guest or IoT network is one of the highest-value steps you can take, because it limits how far an attacker can move if one device is compromised. It isn’t a complete solution on its own — you still need strong passwords, updates, and two-factor authentication — but it dramatically reduces the blast radius of a single failure.
Can hackers get into my smart home through my Wi-Fi password alone?
A strong Wi-Fi password makes it much harder, but it isn’t the only path. Attackers also exploit default device credentials, unpatched firmware, exposed remote-access ports, and compromised cloud accounts. Treat Wi-Fi security as one layer among several rather than the whole defense.
What should I do with a smart device that no longer gets security updates?
Retire it if you can. If you must keep it, isolate it on its own network segment, disable remote access, and avoid using it for anything sensitive — no cameras in private rooms, no door locks. An unpatched device is a permanent, known weakness.
Do smart home devices need two-factor authentication?
Yes, wherever it’s offered. Two-factor authentication on the accounts that control cameras, locks, and hubs means a stolen password alone isn’t enough to get in. It’s especially important for anything with a cloud account, since those accounts are reachable from anywhere in the world.
Is it safe to control my smart home when I’m away from home?
It can be, provided you use the manufacturer’s authenticated app rather than opening ports on your router. Remote access through a reputable cloud service with two-factor authentication is far safer than exposing a device directly to the internet, which is how many cameras end up publicly accessible by accident.


